::: Balanzza ::: Products » Weighing
Weighing

August 7th, 2008

IMPORTANT:
Proper way and position to grip and use your Balanzza Ergo

A. The Balanzza Ergo must be completely horizontal with the screen facing upwards
B. Do not put pressure on the link that attaches the strap to the scale Not following these critical instructions will result in a less than accurate weight reading.

Operational Instructions

WEIGHING

Before weighing:
Whenever possible, please allow the scale to warm up for 30 seconds after first turning the power on so that the scale will function properly and accurately.

Error messages:
EEEE: Overload
low battery Low battery

Grip and Position of the Scale:
Balanzza Ergo is the only horizontal positioned scale in the world; please follow these tips for accuracy and ease of use:

  1. Position your hand along the body of the scale with the display facing upwards, and your fingers towards the floor. Distribute your fingers equally on each side of the rubber protective piece that surrounds the weigh cell, located in the center of the bottom of the scale where the strap attaches to the scale.
  2. For a perfect weighing experience do not allow your fingers to touch the metal
    triangle that connects the strap to the scale.

Weighing procedures:

  1. Press the on button to turn On the scale; and hold it for 3 seconds to turn Off the scale.
    When power is turned on, all display segments appear on LCD for a few seconds and finally “0” will appear on the display.
  2. Select the weighing unit with [UNIT].
    When power is turned on, all display segments appear on LCD for a few seconds and finally “0” will appear on the display.
  3. Start weighing.
    a. If you do not use a container for weighing:
    * Verify the reading is “0”. If not, press on to display “0”.
    * Place objects on the weighing strap to weigh.
    * Lift the object from the ground until hearing the beep sound, this indicates that the weight has been locked and displayed. Set the object down, and read the weight.
    b. If you use a bag or other container for weighing:
    * Place an empty container on the strap and proceed to weigh it. Wait for the stability weighing value to be displayed and press on to display “0”.
    * Place the objects to be weighted in the container.
    * Lift the object from the ground until hearing the beep sound, this indicates that the weight has been locked and displayed. Set the object down, and read the weight.

WARNING

  1. The screen can stop functioning properly if mistreated or hit.
  2. If the strap shows any signs of wear and/or breaks,discontinue use.
  3. When lifting an object with Balanzza please use th e same precautions as any other object,
    the use of the Balanzza does not increase your strength or decrease the weight of the object.
  4. When securing the strap, please keep your fingers outside the clip.
  5. Do not leave the batteries inside the Balanzza for long periods of time without use.

Made in China, 2 AAA batteries Required (Included), Balanzza Patent Pending.