 |
 |
|
|
|
Instructions and Maintenance: Calibrating your Balanzza When to calibrate Calibration may be required when it is initially installed, if the mini scale is moved to a substantial distance. This is necessary because the weight of a mass in one location is not necessarily the same in another location. Also, with time and use, mechanical deviations may occur. Calibration 1. Press and hold UNIT key then turn on the scale (do not release UNIT key now). 2. Display will show HELLO and then CAL, now release UNIT key, display shows AD value. 3. After stable, press RESET key, display shows CAL and then 25.00. 4.Place a 25kg testing weight, and then press RESET key. After stable, display will show PASS and then 25.00kg. 5.Calibration finished. Calibración 1. Oprima y aguante el botón de UNIT y prenda la pesa (No suelte el botón de UNIT todavía). 2. La pantalla mostrara HELLO y luego CAL, suelte el botón UNIT ahora. La pantalla mostrará el valor AD. 3. Una vez estable, oprima el RESET, la pantalla mostrará 25.00. 4. Coloque un peso de 25 Kg. en la pesa, y luego oprima RESET. Luego de estabilizarse, la pantalla mostrara PASS y luego 25 Kg. 5. Calibración ha sido concluida. WEIGHING Before weighing: Whenever possible, please allow the scale to warm up for 30 seconds after first turning the power on so that the scale will function properly and accurately. Error messages: EEEE: Overload  : Low batteryWeighing procedures: 1. Press the  button to turn On the scale; and hold it for 3 seconds to turn Off the scale.When power is turned on, all display segments appear on LCD for a few seconds and finally "0" will appear on the display. 2. Select the weighing unit with [UNIT]. Press [UNIT] to select a weighing unit: "kg" or "lb". Once the unit has been selected, the selected unit will be displayed above the weight value. 3. Start weighing. a. If you do not use a container for weighing: * Verify the reading is "0". If not, press to display "0".* Place objects on the weighing strap to weigh. * Lift the object from the ground until hearing the beep sound, this indicates that the weight has been locked and displayed. Set the object down, and read the weight. b. If you use a bag or other container for weighing: * Place an empty container on the strap and proceed to weigh it. Wait for the stability weighing value to be displayed and press to display "0".* Place the objects to be weighted in the container. * Lift the object from the ground until hearing the beep sound, this indicates that the weight has been locked and displayed. Set the object down, and read the weight. WARNING 1. The screen can stop functioning properly if mistreated or hit. 2. If the strap shows any signs of wear and/or break please stop using the Balanzza. 3. When collapsing the handle please do not have your fingers or hand between the handle. 4. When lifting the object with Balanzza please use the same precautions as any other object, the use of the Balanzza does not increase your strength or decreases the weight of the object. 5. When securing the strap, please keep your fingers outside the clip. 6. Do not leave the batteries inside the Balanzza for long periods of time without use. DOWNLOAD ERGO INSTRUCTIONS |